Ancel Solar Battery Tester

Top Reason to Chose Ancel Solar Battery Tester

1. Accurate tester result in milliseconds (tolerance ±15)

2. BA101 can test CCA100-2000, 30-220Ah, which is the highest CCA in the market

3. Test batteries on and off the vehicle

4. Battery life analysis, Life in percentage (%),Internal re​​sistance value (m),Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

5. Test result based on JIS, EN, DIN, SAE and IEC standards.

6. Easily read LCD screen display

7. Quick test – input battery volume (AH), then it can show the battery status.

8. vehicle cranking system test – cranking time, voltage and status.

9. vehicle charging system test – load voltage, unloaded voltage, ripple status and charging system status.

10. Store the testing result, print function

Notice:

the device don’t need charge. The USB port is only for printed data, when you connect the USB port, the device screen is in white color, it’s normal, not quality problem.

Ancel BA101 Two Built-in Multi-Language Version

1.European Version: English, Spanish, French, German, Italian, Polish 2.Asian Version: English, Japanese, Korean, Chinese

ONE-CLICK QUICK TEST

It can make sure the battery status, including voltage, CCA, electronic resistance, rated CCA, charging value, healthy value and testing result in one second.

Enter the AH value—battery rated capacity, which is marked in the label of the battery.

1). Press UP/DOWN key to select the Quick test, then press ENTER key to confirm.

2). Input the rated battery capacity—xx AH, in general, the battery capacity for 12V vehicle is above 30AH.

3). Then press enter key, the testing result will show one of these, as below Battery test result includes 5 types as following:

Ancel BA101 Battery life analysis and result

1.Good Battery: The battery is without any problem, please be relaxed to use

2.Good Recharge: Good battery but low current, recharge before using.

3.Replace: The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed.

4.Bad Cell Replacement: Battery interior damaged, bad cell or short circuit, replace battery. 5.Charge-retest:Unstable battery shall be recharged and retested to avoid error

Test interface display

Ancel Solar Battery Tester Operating Parameters

1.System voltage: 12 Volts

2.Input voltage range: 9V~15V

3.Power requirements: No internal batteries required.

4.AH range: 30-220AH

Ancel Solar Battery Tester Application

Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major supported battery standards are; JIS, SAE, EN, DIN and IEC .

Ancel BA101 Test Data Print Out for WIN7

1.Please leave us email address to get the print out drive and software for laptop or download in Our Ancel official net : https://www.anceltech.com/